One important frugal skill is the ability to take care of the items you already have. For example, bras are expensive but they will last longer if they are properly washed using a lingerie bag before they are hung to dry.
I found a heavy, polyester, lace remnant on sale at our local thrift store that was perfect for this project. An old lace curtain or tablecloth would also work. I seriously considered using the lace overlay from an old bridesmaid’s dress, because really, what else are you going to do with a puffy lace and satin number from the 1980s?
I made two different sized bags. The larger bag will fit several bras and the smaller bag would work well for washing smaller things like doll clothes or baby socks. I used french seams on these bags to make them sturdier.
I cut my fabric as follows:
|Small Bag||Large Bag|
|Lace||1 piece -20 ½ x 14||1 piece -34 ½ x 15|
|Printed cotton||1 piece -8 ½ x13 ½||1 piece -8 ½ x17 ½|
|Finished size||10 x 13||14 x 17|
You will also need something to use as a drawstring. I reused the drawstring from an old hoodie. A seam ripper and a safety pin were also used.
Fold the lace fabric in half the long way with the wrong sides together. The fold will be the bottom of the bag.
Using a 1/4 seam allowance, sew the lace together along each side (wrong sides together). Trim the seam allowance so that it is 1/8 of an inch. Turn the bag, so that the right sides are together.
You can press the seams, if you wish. Pressing will result in a neater, more professional finished product. However, if you are using a nylon or polyester lace, be sure that your iron is set very low to avoid melting the fabric.
Stitch the seam again using a 1/4 seam allowance. The raw edges of your seam will now be enclosed.
Take the strip of cotton fabric for the top and sew it together along the short edge to form a sleeve. Fold the sleeve in half with the wrong sides together. Slide it over the lace bag so that the raw edges of the sleeve and the bag are aligned. Pin all the way around.
Sew the top to the lace bag using a 1/4 seam allowance. Trim the seam allowance.
Turn the bag, so that the right sides are together. Tuck the sleeve down into the bag and sew another 1/4 seam.
I stitched down the french seam between the top and the lace bag because I have a thing about “floppy” seams. This step is optional, but I think it results in a nicer finished product.
Turn your bag right side out.
Top stitch the cotton section 1 inch from the top of the bag.
Add another row of stitches an inch down from the first row (2 inches from the top). This will form a channel for the drawstring.
Using a seam ripper, gently remove the stitching from the seam between the first and second row of top stitching.
Attach a safety pin to your drawstring and thread it through the prepared channel.
Tie a knot in each end of the drawstring to prevent it from pulling back through the channel. You can thread a bead on the drawstring or use toggles like the kind they use on the drawstrings in the hood of you coat. I think those would work very well.
You are done! Time to go wash some clothes.
Fill your new lingerie bag full of delicate items in need of cleaning. Pull the drawstring tight and ties it in a bow.